Knifeless Tape Does not hurt the paint
1.When used in combination with vehicle wrap films, Cutting Tape enables installers to create imaginative, one-of-a-kind works of art on vehicles
2.It will not cause any damage to the car paint during use.Applications:It is mainly suitable for the surface design of automobiles that can be adjusted in various directions.it can let you finish vehicle graphic installations without a blade.it's designed to protect your vehicle surface from blade damage, which is a Self-adhesive tape for cutting films in business or industrial use.easy to use:it is as sharp as the blade. Patented design stretches slightly and turns easily in any direction for one-of-a-kind works of art. Tape can be broken with hands for faster.Easily cuts most vinyl wrap films.
Knifeless Tape,Cutting Knifeless Tape,Film Cutting Line,Wrapping Knifeless Tape Guangzhou Fuyulai Technology Co.,Ltd , https://www.fylcarstickers.com
Traps frost protection What are the measures
Selection, installation of suitable traps as long as there is steam through, there will be no freezing problems. But if the steam is broken, the steam condensate will create a vacuum in the heat exchanger or in the mains. This will prevent the free flow of condensate from the system before freezing occurs. So, install a vacuum breaker between the drain and the trap. If not from the trap to the return pipe is not the use of gravity discharge, traps and discharge lines should be manually discharged or discharge pipes with anti-freezing measures automatically discharge. Also, when multiple traps are installed together at the trap station, the traps are insulated to prevent freezing. Antifreeze measures are: 1. Traps do not choose the size is too large. 2. Keep trap drain as short as possible. 3. Tilt the trap drain down to speed up the gravity discharge. 4. Trap drain and condensate return line plus insulation. 5. When condensate return line exposed to atmospheric conditions, should consider adding heat pipe. 6. If the return pipe is raised, the vertical discharge pipe should be adjacent to the discharge pipe at the upper part of the return pipe header, and the discharge pipe and the trap discharge pipe together.