Beginning in January 2020, the new dangerous goods vehicles require that the rear axle must be an airbag bridge. What are the pros and cons of the airbag bridge? Do you know? The airbag bridge mainly supports the frame by the air pressure. The airbag bridge can make the whole vehicle lighter , reduce the weight of the body and protect the chassis components. The price is too high and the durability is worrying. These are actually not what you think! The airbag bridge mainly supports the frame by the air pressure, so adjusting the internal air pressure can adjust the height of the airbag to adjust the height of the vehicle. For a car equipped with an airbag suspension, there must be some functional relationship between the air pressure inside the airbag and the weight of the vehicle. Therefore, as long as the driving computer obtains the air pressure signal, it can acquire the axle load and the total weight of the corresponding position. On this basis, we can implement many derived functions, such as overload warnings. For axles with excessive load, the airbag pressure is reduced, and the axle with too low load increases the air pressure. The load on each axle will be more uniform, the degree of tire wear will be more consistent everywhere, and the force of the vehicle chassis will be more scientific, which can extend the service life of the vehicle. Oil tanker / oil truck national unified sales hotline: 15897617666 (WeChat same number)
Brass pipe, a type of nonferrous metal pipe, is pressed and drawn seamless pipe. Copper Pipe has strong, corrosion resistance characteristics, and become the modern contractor in all residential commercial housing water pipe, heating, cooling pipe installation of the first choice. Brass pipe is the best water supply line.
Brass strong, corrosion resistance characteristics, and become modern contractors in all residential commercial housing water pipes, heating, cooling pipe installation of the first choice. Brass pipe is the best water supply line.
Brass pipe has strong, corrosion resistance characteristics, and become the modern contractor in all residential commercial housing water piping, heating, cooling pipe installation of choice. Copper pipe integrates many advantages: it is strong, with the high strength of general metal; At the same time, it is easier to bend, twist, crack and break than the general metal, and has a certain anti-frost heave and anti-impact ability, so the copper water pipe in the water supply system in the building once installed, safe and reliable to use, even without maintenance and maintenance.
Advantages of brass pipe: copper pipe is hard, not easy to corrosion, and high temperature, high pressure resistance, can be used in a variety of environments. Compared with this, many other pipe shortcomings are obvious, such as the past residential use of Galvanized Steel pipe, easy to rust, use time will not be long, tap water yellow, small water flow and other problems. There are also some materials at high temperatures will quickly reduce the strength of the use of hot water pipe will cause unsafe risks, and copper melting point as high as 1083 degrees Celsius, the temperature of the hot water system for copper pipe negligible.
Brass tube: Weight per meter =0.02670* Wall thickness * (OD - wall thickness)
Electrical copper pipe, refrigeration copper pipe, high pressure copper pipe, corrosion resistant copper pipe, connection copper pipe, water channel copper pipe, electric heating copper pipe, industrial copper pipe.
Brass Pipe,Brass tube,Seamless Copper Pipe Shandong Longhao Steel Group Co., Ltd. , https://www.longhaosteels.com
What are the pros and cons of airbag bridges?