Water/Air Turbine Meter Low Cost Flow Meter

Model NO.: A+E 90F
HS Code: 9026100000
Water/Air Turbine meter Low Cost Flow Meter
Water/Air Turbine Meter Low Cost Flow Meter

Outline And Installation Dimensions         
Name Material
Nut ABS
float
Connecting pipe
taper pipe AS
Sealing ring Rubber

Water/Air Turbine Meter Low Cost Flow Meter
Rotameter has the characteristics of Light weight, corrosion resistance, not easily broken, non-toxic and tasteless, easy to use, mainly used in chemical, 
light industry, medicine, food, environmental protection and other departments.

Short-Tube Type
Diameter Type Range Size Specification of welded pipe Thread  Accuracy Pressure
Mpa		 Temperature
ºC
L B D
DN15 A+E-90-15S 6-60L/h 200 20 45 20 G1/2" 4 ≤0.6 0~40(The medium is water or weak base)
10-100L/h
DN25 A+E-90-25S 0.1-1m³/h 226 32 60 32 G3/4"
0.16-1.6m³/h
0.25-2.5m³/h
DN32 A+E-90-32S 0.4-4m³/h 288 40 74 40 G1"
0.6-6m³/h
DN50 A+E-90-50S 1-10m³/h 341 63 98 63 G11/2"
1.6-16m³/h
DN65 A+E-90-65S 5-25m³/h 430 75 122 75 G2
8-40m³/h
12-60m³/h

Long-TubeType
Diameter Type Range Size Specification of welded pipe Thread  Accuracy Pressure
Mpa		 Temperature
ºC
L B D
DN15 A+E-90L-15S 10-100L/h 280 20 45 20 G1/2" 4 ≤0.6 0~0~40(The medium is water or weak base)
16-160L/h
25-250L/h
40-400L/h
60-600L/h
DN25 A+E-90L-25S 100-1000L/h 380 32 68 32 G3/4"
160-1600L/h
250-2500L/h
300-3000L/h
DN50 A+E-90L-50S 0.4-4m³/h 435 63 98 63 G11/2"
0.6-6m³/h
1-10m³/h
1.6-16m³/h

Flange Type Outline And Installation Dimensions
Water/Air Turbine Meter Low Cost Flow Meter                     Water/Air Turbine Meter Low Cost Flow Meter
Diameter Type Range Size Accuracy Pressure
Mpa		 Temperature
ºC
L A n-b
DN15 A+E-90-15S 6-60L/h 240 Φ 65 4- Φ 14 4 ≤0.6 0~0~40(The medium is water or weak base)
  10-100L/h 320
DN25 A+E-90-25S 0.1-1m³/h 282 Φ 85 4- Φ 14
0.16-1.6m³/h
  0.25-2.5m³/h 432
DN32 A+E-90-32S 0.4-4m³/h 351 Φ 100 4- Φ 18
  0.6-6m³/h
DN50 A+E-90-50S 1-10m³/h 425 Φ 125 4- Φ 18
  1.6-16m³/h 519
DN65 A+E-90-65S 5-25m³/h 528 Φ 145 4- Φ 18
8-40m³/h
12-60m³/h
DN100 A+E-90-100S 8-50m³/h 555 Φ 180 8- Φ 18
14-90m³/h
16-120m³/h
DN125 A+E-90-125S 25-150m³/h 555 Φ 210 8- Φ 18
25-180m³/h
25-200m³/h
DN150 A+E-90-150S 25-150m³/h 555 Φ 240 8- Φ 18
25-180m³/h
25-200m³/h





















 

Plastic Film Dewatering Drying Machine

Plastic Film Dewatering Drying Machine is used after the plastic film/plastic agricultural film/PP woven bags/Space bag/tons bags/thin waste plastics plastic sheets washed,using the squeeze dewatering principle,squeeze the water from the plastic by rotating screw.The water will flow out from the bottom,the plastic will get hot by high intensity extrusion friction,and will plasticizing mildly after the mould heating.Finally the blade will cut the granules from the mould.

Advantage of squeezer dryer plastic machine:

1. Low power consumption. Main motor power between 90kw, no need to connection drying pipe system. Compare transitional horizontal dewatering machine+drying pipe system, can save power 40-50%

2. Small land occupied

3. Low rotation speed, almost no noise.

4. Dewatering function is better, final products humidity less then 3%

5. After squeeze dry granulating machine, the material can put into granulator driectly, do not need the forced feeding machine.

6. Mechanical squeeze dewatering,compared with the original hot air drying, do not need use dewatering machine, drying system and the agglomerator machine,it can save the energy greatly.

Plastic Film Dewatering Drying Machine,dewatering plasticplastic dewater machine,dry plastic dewatering machine

zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstars-machineries.com