Building Hardware,Construction Hardware,Construction Hardware Castings,Investment Casting DONGYING SHENGYU METAL PRODUCT CO.,LTD , https://www.sycastingprocess.com
When the floor heating system is used for the first time or for a long time, the floor temperature should be set to the lowest temperature, and then the temperature should be increased slowly. It is advisable to raise the temperature by 1°C per hour, so that the wooden floor can gradually adapt to the temperature rise. If the heating is too fast, it may cause the wooden floor to be heated too fast, resulting in unstable twisting and cracking changes, affecting the service life of the wooden floor.
1. Gradually warm up after installing for 24 hours. Be sure to keep the floor clean and dry before heating to prevent cracking and distortion of the floor due to excessive heating.
2. When using the floor heating system for the first time or for a long time, set the minimum temperature first, then slowly raise the temperature. It is advisable to raise the temperature by 1°C per hour, so that the wooden floor gradually adapts to the temperature rise. If the heating is too fast, it may cause the wooden floor to be heated too fast, resulting in unstable twisting and cracking changes, affecting the service life of the wooden floor.
3. As far as possible in the geothermal heating on the wooden floor as a fixed decoration or place no legless furniture, to prevent local heat is not smooth, heat boring in the wood floor, easy to produce uneven deformation of the floor due to heat.
4. Scientific maintenance: Can not suddenly rise. The cold winter usually has no room indoors, which can reduce heating and cooling, but it can't close the valve and must be controlled at 0°C or more.
Warm use precautions