Although pneumatic three-way parts are installed on the pneumatic equipment, if the working environment is poor, the pneumatic system cannot be ensured to work stably and reliably. It is necessary to strengthen the pre-purification treatment of the air source to better meet the requirements of use. If unpurified compressed air is used, the pneumatic equipment will not work properly. However, in practical applications, the purification of gas sources is often overlooked. Some people think that as long as there is compressed air, the pneumatic equipment can work. Therefore, some units use the unpurified air source directly from the air compressor station when applying pneumatic equipment. Obviously, this is very unscientific. Others are pneumatic three-way parts (filters, pressure reducing valves and oil misters) installed on the pneumatic equipment, so it is safe to use the air supply. Some suggestions for purifying the gas source. First, the air compressor should be placed in a clean environment. There should be cleaning measures for the air compressor room. Even if it is for mobile or small air compressors, do not place it casually; avoid dust, humidity and other occasions. The volatile matter that has a corrosive effect on the rubber seal should be avoided to ensure the quality of the inhaled air. Second, the pipeline for conveying the compressed air should be installed in a regular piping manner. The compressed air output from the air compressor is cooled down by the cooling system. Therefore, the lowest end of the main pipeline should be arranged to discharge water regularly, especially before the power is turned on, so as to avoid the compressed air when starting up. Bring into the pneumatic system; third, when it is necessary to remove dust and lack high-quality filter device, a simple filter can be used instead, and good results can be obtained. 4-8 Ton Electric Roll Pallet Truck
Zowell roll pallet truck 4-8 tons is a
material handling equipment specialized in the transfer of heavier roll materials in
pallet inside and outside the production line and warehouse by special legs.
The pallet truck is only used for plane transportation for no lifting mast. Zowell XP electric pallet trucks are equipped
with AC drive motor and multi-functional handle, emergency switch, dual balance wheel as well as side
loading battery for safety, efficiency and less fatigue in
operation. Buffered pedal also extends the flexibility for various scenarios.
Zowell heavy duty pallet truck is widely used in the glass manufacturing, mold industry and paper manufacturing industry. Standard with bucher pump assembly and AC Curtis controller, which makes sure its high quantity.
Apart from 4 ton, 5 ton and 8 ton capacity heavy duty pallet truck, Zowell can also make 10 ton,12 ton and 15 ton capacity heavy duty pallet jack or heavy duty platform truck or roll pallet truck. Zowell is the number one Chinese manufacturer who can make all kinds of electric warehouse material handling equipment.
global electric pallet truck,high lift pallet Jack, roll pallet truck, roll jack,yale electric pallet jack Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklift.com
The air compressor should be placed in a clean environment.