Rotary Vane Type Double Stage Vacuum Pump (2X)

Model NO.: 2X
Impeller: Single-Stage Pump
Trademark: SUOTO
Transport Package: Wooden Case
Origin: Shanghai, China
HS Code: 8414100090
Model NO.: 2X
Impeller: Single-Stage Pump
Trademark: SUOTO
Transport Package: Wooden Case
Origin: Shanghai, China
HS Code: 8414100090
Application
2X Rotary Vane Vacuum Pump is one of the basic equipment for obtaining vacuum for airtight containers by exhausting gas. It can be used alone, or used as the fore pump in front of the booster pump, diffusion pump, molecular pump, etc. This pump is applicable to the vacuum metallurgy, vacuum welding, vacuum impregnation, coating, vacuum drying, as well as the vacuum treatments in chemical and pharmaceutical industry, electric vacuum devices and other industries.

Notices
1. The pump can work within the ambient temperature range of 5~40 and under the inlet pressure less than 1330PA. It is also allowable for long-term continuous work.
2. The pump is neither applicable to pump the gases which have excessive oxygen content, poisonous and explosive feature, corrosive effects to etals and chemical reactions with oil of pumps, and dust particles, nor act as a transfer pump to transfer gas form one container to another.
3. The continuous working hours of the pump under the inlet air pressure of 6000PA shall not exceed 3min to avoid damages caused by oil injection or bad lubrication.

Specifications
Model 2X-4A 2X-8A 2X-8 2X-15 2X-30A 2X-70A
(L/S)
Pumping Speed		 4 8 8 15 30 70
(≤ Pa)
Ultimate Pressure		 ≤ 6× 10 -2
(kw)
Motor Power		 0.55 1.1 1.1 2.2 3 5.5
(Degrees C)
Temperature Rise		 ≤ 4 Degrees C
dB(A)
LW Noise		 ≤ 75 ≤ 78 ≤ 78 ≤ 80 ≤ 82 ≤ 86
(mm)
Inlet Diameter		 Φ 25 Φ 25 Φ 40 Φ 40 Φ 65 Φ 80
(rpm)
Rotational Speed		 450 550 320 320 450 420
(L)
Injection Amount of Oil		 0.7 0.9 2 2.8 2 4.2
(cm)
Size		 55× 34× 41 55× 43× 44 79× 43× 54 79× 53× 54 78× 50× 56 91× 65× 70
(Kg)
Weight		 54 70 135 196 240 428
Application
2X Rotary Vane Vacuum Pump is one of the basic equipment for obtaining vacuum for airtight containers by exhausting gas. It can be used alone, or used as the fore pump in front of the booster pump, diffusion pump, molecular pump, etc. This pump is applicable to the vacuum metallurgy, vacuum welding, vacuum impregnation, coating, vacuum drying, as well as the vacuum treatments in chemical and pharmaceutical industry, electric vacuum devices and other industries.

Notices
1. The pump can work within the ambient temperature range of 5~40 and under the inlet pressure less than 1330PA. It is also allowable for long-term continuous work.
2. The pump is neither applicable to pump the gases which have excessive oxygen content, poisonous and explosive feature, corrosive effects to etals and chemical reactions with oil of pumps, and dust particles, nor act as a transfer pump to transfer gas form one container to another.
3. The continuous working hours of the pump under the inlet air pressure of 6000PA shall not exceed 3min to avoid damages caused by oil injection or bad lubrication.

Specifications
Model 2X-4A 2X-8A 2X-8 2X-15 2X-30A 2X-70A
(L/S)
Pumping Speed		 4 8 8 15 30 70
(≤ Pa)
Ultimate Pressure		 ≤ 6× 10 -2
(kw)
Motor Power		 0.55 1.1 1.1 2.2 3 5.5
(Degrees C)
Temperature Rise		 ≤ 4 Degrees C
dB(A)
LW Noise		 ≤ 75 ≤ 78 ≤ 78 ≤ 80 ≤ 82 ≤ 86
(mm)
Inlet Diameter		 Φ 25 Φ 25 Φ 40 Φ 40 Φ 65 Φ 80
(rpm)
Rotational Speed		 450 550 320 320 450 420
(L)
Injection Amount of Oil		 0.7 0.9 2 2.8 2 4.2
(cm)
Size		 55× 34× 41 55× 43× 44 79× 43× 54 79× 53× 54 78× 50× 56 91× 65× 70
(Kg)
Weight		 54 70 135 196 240 428

Brake Chamber

The function of the brake chamber is to change the pressure of the compressed air into the mechanical force that makes the brake camshaft rotate, so as to realize the braking action. The brake chamber is clamp clamp diaphragm type. The front and rear brake chambers are different in size, but their structure is basically the same.

When the car braking, air from the air inlet into the brake chamber, under the action of air pressure to make the diaphragm deformation, promote the push rod, and drive the brake Adjusting Arm, rotation of the brake CAM, brake shoe friction disc pressure to the Brake Drum and brake.

The company advocates "integrity, enthusiasm, pragmatic, innovation, cooperation, win-win" business purposes, our product quality is excellent, sales attitude enthusiasm. If buyers can't find the product they want here, they can contact us. If time permits, we can support mold production.

I am very familiar with the foreign trade process, and have provided good support for foreign trade companies in logistics, port transportation, packaging and other aspects, ensuring the safety, perfection and convenience of goods inventory.

Price advantage is obvious, our company will provide preferential prices, reliable product quality, so that dealers and company customers are satisfied.

Delivery time: depends on order quantity and time. Specific efforts made to meet customer requirements.

Terms of payment: cash on delivery. Or you can pay part of the deposit and the balance before delivery.

Brake Chamber,Piston Brake Air Chamber,Spring Rear Brake Air Chamber,Military Vehicle Rear Brake Chamber

Linzhou ChengDeshun Machinery Foundry Co., Ltd. , https://www.cdswheels.com