Marine Sewage Treatment System for 8-12 Persons

Model NO.: SWCM-10
Power: 2.25kw
Capacity: 8-12persons
Average Treatmetn Load: 700L/D
Discharge Water Pressure: 0.15MPa
Discharge Style: Automatic Discharge
Outline Dimension: 1160*1150*1350mm (L*B*H)
Protection Grade: Electric Control Box IP44
Insulation Grade of Motor: F
Manufacture Quality: ISO9001-2000
Trademark: HS
Transport Package: Wooden Case
Specification: 15PPM
Origin: Jiangsu
HS Code: 8908000000
Model NO.: SWCM-10
Power: 2.25kw
Capacity: 8-12persons
Average Treatmetn Load: 700L/D
Discharge Water Pressure: 0.15MPa
Discharge Style: Automatic Discharge
Outline Dimension: 1160*1150*1350mm (L*B*H)
Protection Grade: Electric Control Box IP44
Insulation Grade of Motor: F
Manufacture Quality: ISO9001-2000
Trademark: HS
Transport Package: Wooden Case
Specification: 15PPM
Origin: Jiangsu
HS Code: 8908000000
SWCM-10 marine sewage treatment system meests: 
1. Steel seagoing vessel classification rules (CCS)
2  GB10833-89       Marine sewage treatment system specification
3  GB2506-2005       Marine pipe flanges Connection dimensions and mating face
4 GB/T13306-1991       Name plate
5 Annex  IV of MARPOL 73/78
6 IMO.MEPC.159(55)Resolution  

SWCM-10 Marine Sewage treatment system constitution:
This sewage treatment system mainly constituted by aeration tank, contact oxidation tank, settling tank, membrane tank, cutting pump, air pump, discharge pump, electric control box, membrane module, UV sterilizer and accessories of pipe lines.

Main technical characteristic of SWCM-10 Marine Sewage treatment system:
Capacity: Rated capacity: 10 persons         
Average treatment load: 700L/d
Discharge standard: The discharge water should meet the requirements of IMO MEPC.159(55) resolution.
TSS≯35mg/l  BOD5≯25 mg/l  COD≯125 mg/l   Coliform ≯100PCS/100ml      pH=6~8.5
Discharge water pressure: 0.15 MPa   Ambient temperature:5~50ºC        Relative humidity:≤95%
Discharge style: Automatic discharge  
Outline dimension: L×B×H≈1160×1150×1350 mm
 Power: 5. 5KW
 Operating and maintenance space ≥600mm (surface)
The main body of this marine sewage treatment system is made of Q235-B steel plate.
Sand blast and anticorrosion coat the pipe support, stand, main body and other spare parts.
Sand blast the device surface to reach Sa2.5 grade. The paint of internal wall which contacts with sewage is epoxy tar paint.  Protection grade: Electric control box IP44   Motor IP44   Insulation grade of motor: F
SWCM-10 Marine Sewage treament systme equipment list
 
No. Name Amount Remarks
1 Main body (includes aeration tank, contact oxidation tank, settling tank, membrane tank)      1set  
2 Cutting pump 1set  
3 Air pump 2sets  
4 Discharge pump 1set  
5 UV disinfectant 1set  
6 Membrane module 1set  
7 Electric control box 1set  
8 Piping accessory of device 1set  
 Spare parts of this treatment system:  
No. Name Amount Remarks
1 Mechanical seal 1pcs Cutting pump
2 O ring 1pcs Cutting pump
Warranty period of this sewage treatment system:
 Warranty period is one year after delivery of vessel from shipyard. During warranty period, if there are troubles owning to the design or quality, factory should give a free maintenance or replacement.

 
  SWCM-10 marine sewage treatment system meests: 
1. Steel seagoing vessel classification rules (CCS)
2  GB10833-89       Marine sewage treatment system specification
3  GB2506-2005       Marine pipe flanges Connection dimensions and mating face
4 GB/T13306-1991       Name plate
5 Annex  IV of MARPOL 73/78
6 IMO.MEPC.159(55)Resolution  

SWCM-10 Marine Sewage treatment system constitution:
This sewage treatment system mainly constituted by aeration tank, contact oxidation tank, settling tank, membrane tank, cutting pump, air pump, discharge pump, electric control box, membrane module, UV sterilizer and accessories of pipe lines.

Main technical characteristic of SWCM-10 Marine Sewage treatment system:
Capacity: Rated capacity: 10 persons         
Average treatment load: 700L/d
Discharge standard: The discharge water should meet the requirements of IMO MEPC.159(55) resolution.
TSS≯35mg/l  BOD5≯25 mg/l  COD≯125 mg/l   Coliform ≯100PCS/100ml      pH=6~8.5
Discharge water pressure: 0.15 MPa   Ambient temperature:5~50ºC        Relative humidity:≤95%
Discharge style: Automatic discharge  
Outline dimension: L×B×H≈1160×1150×1350 mm
 Power: 5. 5KW
 Operating and maintenance space ≥600mm (surface)
The main body of this marine sewage treatment system is made of Q235-B steel plate.
Sand blast and anticorrosion coat the pipe support, stand, main body and other spare parts.
Sand blast the device surface to reach Sa2.5 grade. The paint of internal wall which contacts with sewage is epoxy tar paint.  Protection grade: Electric control box IP44   Motor IP44   Insulation grade of motor: F
SWCM-10 Marine Sewage treament systme equipment list
 
No. Name Amount Remarks
1 Main body (includes aeration tank, contact oxidation tank, settling tank, membrane tank)      1set  
2 Cutting pump 1set  
3 Air pump 2sets  
4 Discharge pump 1set  
5 UV disinfectant 1set  
6 Membrane module 1set  
7 Electric control box 1set  
8 Piping accessory of device 1set  
 Spare parts of this treatment system:  
No. Name Amount Remarks
1 Mechanical seal 1pcs Cutting pump
2 O ring 1pcs Cutting pump
Warranty period of this sewage treatment system:
 Warranty period is one year after delivery of vessel from shipyard. During warranty period, if there are troubles owning to the design or quality, factory should give a free maintenance or replacement.

 
 

PVC Pallet

Pvc Pallet,Pallet Pvc,Plastic Half Pallets,Baking-Free Pvc Block Pallet

Nantong Hengda Non-burned Machinery Engineering Co.,ltd , https://www.hdbrickmachine.com