The American Axle Company and Jianghuai Automobile Company jointly entered into a joint venture to resist the challenges of the financial crisis and jointly plan future development. On December 10, both parties signed a formal joint venture agreement in Hefei. Sun Jinlong, Member of the Standing Committee of the Provincial Party Committee and Secretary of the Hefei Municipal Party Committee, attended the signing ceremony. American Axle is the largest axle company in the United States. Jiangqi invested in Hefei Axle Co., Ltd. and established the Hefei Meiqiao Automotive Transmission and Chassis Systems Co., Ltd. with American Axle. The joint venture company is located in Jiang Auto Parts Industrial Park in Hefei Economic Development Zone. The registered capital is RMB 140 million and the total investment is RMB 420 million. The two companies each have 50% shares. The products produced by the joint venture include passenger car key components, front and rear axles of MPV, SRV splitter assembly and reducer assembly. U.S. Deputy Chairman of the Axle Car Corporation, Eugen, said in an interview with this reporter that the cooperation with Jiangjiang is mainly based on two points: First, it is full of confidence in the cooperation with Jiangqi; second, it also took the opportunity to learn Jianghai's experience in operating the gas market. Before the signing ceremony, Sun Jinlong met with businessmen from the United States. The two parties conducted conversations in a cordial and friendly atmosphere. Globe valve, also known as cut-off valve, is a mandatory sealing valve, so when the valve is closed, pressure must be applied to the valve disc to force the sealing surface not to leak. When the medium enters the valve from under the valve disc, the resistance that the operating force needs to overcome is the friction force between the valve stem and the packing and the thrust generated by the pressure of the medium. The force to close the valve is greater than the force to open the valve, so the valve stem The diameter of the valve should be large, otherwise the failure of the top of the valve stem will occur. According to the connection method, it is divided into three types: flange connection, thread connection and welding connection. After the appearance of the self-sealing valve, the medium flow direction of the globe valve is changed from the top of the valve disc into the valve cavity. At this time, under the action of the medium pressure, the force to close the valve is small, but the force to open the valve is large, and the diameter of the valve stem can be adjusted accordingly. decrease. At the same time, under the action of the medium, this form of valve is also tighter. my country's valve "Three Chemicals" once stipulated that the flow direction of the globe valve should be from top to bottom. When the globe valve is opened, the opening height of the valve disc is 25% to 30% of the nominal diameter. The flow rate has reached the maximum, indicating that the valve has reached the fully open position. Therefore, the fully open position of the globe valve should be determined by the stroke of the valve disc. Shut-Off Valve,Shutoff Valve,Automatic Shut Off Valve,Auto Shut Off Valve Jiangsu Qiantu Trading Co., Ltd. , https://www.qiantupump.com
Joint venture with JAC to establish Hefei as the largest axle company in Hefei