PE Anti Corrosion Bitumen Tape
The advantages of modified bitumen anti-corrosion tape:
1, modified bitumen anti-corrosion tape with high elongation, resilience, and thus can largely overcome the substrate deformation caused by the fracture of waterproof materials caused by leakage, waterproof, good sealing, and can be achieved since the fusion.
Anti-Corrosion Bitumen Tape,Pe Anti Corrosion Tape,Pe Bitumen Tape Coating,Asphalt Tape JINING XUNDA PIPE COATING MATERIALS CO.,LTD , https://www.xundapipelinetape.com
3, high electrical insulation, excellent aging resistance stability, strong resistance to ultraviolet radiation.
4, modified bitumen anti-corrosion tape can be self-fusing, even if it enters foreign bodies or is pierced by foreign bodies can quickly repair itself, restore the original state, to ensure no seepage and no leakage.
5.The tape can be wound in a single layer to achieve ordinary or reinforced anti-corrosion. Change the traditional tape need multi-layer winding, reduce the anti-corrosion operation process of human factors on the quality of anti-corrosion caused by the impact, reduce the construction costs.
6, modified bitumen anti-corrosion tape construction is simple, fast, no curing time, manual, mechanical work can be, shorten the construction cycle.
7, cold construction without hot melt or other adhesives, simple, reliable, environmentally friendly, unique sub-waterproof function, can be caused by the coil breakage of leakage limited to the local range, well avoid the overall failure of the waterproof layer.
Jinling Special Coatings Energy Saving and Emission Reduction Project Passes Acceptance Audit
Jiangsu Provincial Jinling Special Coatings Co., Ltd. implemented the provincial “Energy Conservation and Emission Reduction (Recycling Economy)†construction project and successfully passed the acceptance check in recent days. In order to reduce waste, reduce raw material consumption, increase economic efficiency, and purify the production workshop air and overcome the environmental impact, Jiangsu Jinling Special Coating Co., Ltd. raised RMB 3 million by itself and implemented “energy saving and emission reduction†under the support of the Provincial Economic and Trade Commission. Circular economy) "Construction project. It mainly through the "suction and discharge oil suction device technology", the treatment of waste gas and dust to achieve the purpose of recycling economy. This technical device mainly sucks the exhaust gas dust at each suction point into the suction duct through a suction (sucking) fan, and sends it to the treatment tower. In the tower, the exhaust gas is sprayed with diesel oil, which causes the diesel oil to become a mixed liquid. The dust is soaked in itself and accumulates under the mixed liquid. Dust deposits can be recovered for use as constitutional materials in dark anti-corrosive coatings. Volatile gas and diesel mixture can be reused. And regularly recovered as a paint thinner. Therefore, the "exhaust gas" and "dust" of the company's production plant have been effectively recycled and utilized, and the recycling amount reaches 98%, forming a good recycling economy. After the implementation of the project, the recycling economic revenue of more than 400 tons of annual recycling amounted to more than 3 million yuan. It has made good achievements in reducing emissions and reducing consumption, and has improved the production workshop environment. The level of clean production has been unprecedentedly improved.