The precision machining we usually talk about generally refers to precision CNC Machining, CNC turning, CNC milling, CNC turning and milling composite machining, grinding, wire cutting, EDM machining, etc. The parts obtained by these machining methods can usually achieve relatively high precision and surface finish. Moreover, Precision Machining Parts has a wide selection of materials, and most materials can be used for CNC machining. Since the precision machining parts need to be machined one by one on the machine tool, the cost of mass production is relatively high compared with the parts that are directly formed by the mold. Of course, the most suitable and reasonable processing method to choose mainly depends on the product materials and the requirements of the product itself. SCZY has very rich experience in Precision Machining Parts and CNC Machining Parts ( They are included the stainless steel machining parts, aluminum machining parts, brass machining parts, titanium machining parts, plastic machining parts etc). Our normal machining accuracy can reach ±0.01mm, and for some special requirements, the accuracy can reach ±0.005mm (depending on specific products). We usually choose the most reasonable method according to the drawing requirements and recommend it to customers. Below are some pictures of precision machined parts for reference only.
Precision Machining Parts,Precision Machining Services,CNC Machining Services,CNC Machining Parts,CNC Services Shenzhen SCZY Technology Co.,Ltd , https://www.szcasting.com
In fact, careful observation is not difficult to find, in addition to communications, all walks of life are entering the "micro-era." Today Xiao Bian took everyone to the instrumentation industry to see.
The “micro†of the instrumentation industry is “small size, large efficiencyâ€, “low consumption, high performanceâ€, “short time, long lifeâ€. Gradually toward the "portable", "hand-held" "car-mounted" "embedded" direction.
2011-11-26, Instant Palmylated Hemoglobin Detector Byron (A1CNow+) is listed in China. Expert analysis: The launch of this product will give patients and doctors a "precise, fast and simple" innovative detection experience. In clinical practice, it takes 2-3 days to obtain the results of glycosylated hemoglobin. Today, the time is reduced to 5 minutes. That is fast and accurate.
The phenomenon of drunk driving violations is not uncommon. With the increase in penalties and detection needs of road traffic safety authorities, new blood alcohol detectors have emerged. Its compact size, high degree of automation, and ease of operation, it has become the ideal special instrument for the rapid and accurate and automatic detection of blood alcohol content by the traffic police judicial department.
Water is the source of life. It is worthy of everyone's attention today when the whole nation advocates environmental protection. The previous water quality monitoring was sent back to the special monitoring station's laboratory after collecting water samples, which was time-consuming and labor-intensive. Now, the results can be directly obtained through the multifunctional water quality analyzer, which greatly improves the efficiency of water quality monitoring.
The advent of “micro-era†of instrumentation is definitely not accidental. Along with this development trend, we expect more innovative products to emerge, and we believe this will bring a brighter tomorrow for instrumentation companies. 
Instrumentation products step into the "micro-era"
From "Weibo" to "WeChat" to "Micro-Group", in today's fast-paced modern society, more and more "micro-things" have emerged in people's lives.