Hfd-C Water Locator Device for Sale

Model NO.: HFD-C
Detection Depth: <300m
Measuring Range: 0-255mv
Measuring Channel: 7 Channels
Measuring Frequency: 4900,2000,600,170,67,35,25Hz
Frequency Tolerance: 2%
Display: 5" Touch Screen
Interface: USB2.0
Power Source: DC7.4V 5200mAh Lithium Battery
Power Consumption: 400mA
Trademark: Hanfa
Transport Package: Wooden Case or as Your Requirement
Specification: 2.3KG
Origin: Zhengzhou City
Model NO.: HFD-C
Detection Depth: <300m
Measuring Range: 0-255mv
Measuring Channel: 7 Channels
Measuring Frequency: 4900,2000,600,170,67,35,25Hz
Frequency Tolerance: 2%
Display: 5" Touch Screen
Interface: USB2.0
Power Source: DC7.4V 5200mAh Lithium Battery
Power Consumption: 400mA
Trademark: Hanfa
Transport Package: Wooden Case or as Your Requirement
Specification: 2.3KG
Origin: Zhengzhou City
HFD-C water locator device for sale

1. Characteristics:
 
1) Monitoring 7 frequency at the same time
2) Suitable for depths of 300m 
3) Easy of handling, esay to learn
4) Auto-monitoring, auto-storing data, auto-drawing curves
5) USB ports.


Hfd-C Water Locator Device for Sale



 
  Main technical parameters of HFD-C groundwater detector:
 
Measuring range 0-255mv
Detection depth <300m
Measuring channel 7 channels
Measuring frequency 4900,2000,600,170,67,35,25HZ
Frequency tolerance 2%
Resolution 0.001mV 
Repetitive error ±2% ±2 Bit
A/D switch 16 Bits 1Msps
Input impedance ≥10MΩ
Power frequency suppression >80dB
Data storage 48W
Display 5" touch screen
Interface USB2.0
Power source DC7.4V 5200mAh lithium battery
Power Consumption 400mA
Temperature -20ºC~+60ºC
Humidity 80%
Dimension 27×22×15CM 
Weight 2.3KG


Hfd-C Water Locator Device for Sale
Hfd-C Water Locator Device for Sale
2. Brief Introduction:
 
HFD-C Multi-Function Natural Electrical Field detector is a water detector which is specifically designed for depths of 300m.
It monitors the changes of underground electrical resistivity by measuring the intensity of natural electrical field, then analysing the position and depths of underground water.
This instrument solved a major issue, which is freqency choosing and anti-jamming in a natural electrical field.
It uses waterproof shell and touch screen, which is easy of handling and easy to learn.


HFD-C Multi-Function Natural Electrical Field detector is portable, efficiency, easy-handling and accurate analysis. It is auto-measuring which could show data and curves clearly and simple.
Comparing with traditional DC electrical water detector, its speed of measuring was increased more than 8 times, but the instrument weight was decreased 8 times. 
In the past 20 years experience, we won a high reputation and were high acclaimed by our customers.

3.Compare with traditional geo-electrical water detectors:
Traditional geo-electric water detectors HFD-C Ground Water Detector
Heavy meter and complicated wiring due to manual power supply. No need power supply, use natural electric field and 20 meters receiver pole, through special amplify method to complete survey.
Need 3-5 persons or more to operate it and cause heavy work and low efficiency. 2 people are enough to finish the work High efficiency
Heavy, about 50-500KG, hard to remove. Light weight, <5KG, easy to carry.
Need to convey data to PC and use various software to draft and analyze. We configure a 4G U-disk storage to introduce the data! Then you can do various operations for the measured data.
Professional operations and expensive Very practical and low cost
Just know water location and depth Can know water location, water supply direction, water depth and water outflow.

4. Application:
Metal and non-metal ore survey;
Decrease mineral invest venture and increase exploration success rate;
Underground water detect in all kinds of the geological conditions;
Meet demand of drinking water, industrial usage and agricultural irrigation;
Engineering geological prospect and disaster geological detect;
Coal goaf, archaeological mining, city exploration and non-metal pipe survey.
 
5. Main features:
Fast and high efficiency.
Easy to carry.
Easy operation.
Good precision and high accuracy.
Very practical and low cost.
Flexible array-traditional and unique array method.
Hfd-C Water Locator Device for Sale
6. Advantage:  
 
1. It is integrated into an aluminum alloy tool case, then can be carried freely.
2. Built-in charging lithium batteries, can fast charge for 4 hours, then you can use it for 16 hours.
3. Special rough measurement and fine measurement electrodes largely improve the speed and precision of equipment.
4. Multiple anti-jamming design and unique anti-jamming modes to choose largely increase the accuracy and stability of data.

 Hfd-C Water Locator Device for Sale
 Hfd-C Water Locator Device for Sale
  HFD-C water locator device for sale

1. Characteristics:
 
1) Monitoring 7 frequency at the same time
2) Suitable for depths of 300m 
3) Easy of handling, esay to learn
4) Auto-monitoring, auto-storing data, auto-drawing curves
5) USB ports.


Hfd-C Water Locator Device for Sale



 
  Main technical parameters of HFD-C groundwater detector:
 
Measuring range 0-255mv
Detection depth <300m
Measuring channel 7 channels
Measuring frequency 4900,2000,600,170,67,35,25HZ
Frequency tolerance 2%
Resolution 0.001mV 
Repetitive error ±2% ±2 Bit
A/D switch 16 Bits 1Msps
Input impedance ≥10MΩ
Power frequency suppression >80dB
Data storage 48W
Display 5" touch screen
Interface USB2.0
Power source DC7.4V 5200mAh lithium battery
Power Consumption 400mA
Temperature -20ºC~+60ºC
Humidity 80%
Dimension 27×22×15CM 
Weight 2.3KG


Hfd-C Water Locator Device for Sale
Hfd-C Water Locator Device for Sale
2. Brief Introduction:
 
HFD-C Multi-Function Natural Electrical Field detector is a water detector which is specifically designed for depths of 300m.
It monitors the changes of underground electrical resistivity by measuring the intensity of natural electrical field, then analysing the position and depths of underground water.
This instrument solved a major issue, which is freqency choosing and anti-jamming in a natural electrical field.
It uses waterproof shell and touch screen, which is easy of handling and easy to learn.


HFD-C Multi-Function Natural Electrical Field detector is portable, efficiency, easy-handling and accurate analysis. It is auto-measuring which could show data and curves clearly and simple.
Comparing with traditional DC electrical water detector, its speed of measuring was increased more than 8 times, but the instrument weight was decreased 8 times. 
In the past 20 years experience, we won a high reputation and were high acclaimed by our customers.

3.Compare with traditional geo-electrical water detectors:
Traditional geo-electric water detectors HFD-C Ground Water Detector
Heavy meter and complicated wiring due to manual power supply. No need power supply, use natural electric field and 20 meters receiver pole, through special amplify method to complete survey.
Need 3-5 persons or more to operate it and cause heavy work and low efficiency. 2 people are enough to finish the work High efficiency
Heavy, about 50-500KG, hard to remove. Light weight, <5KG, easy to carry.
Need to convey data to PC and use various software to draft and analyze. We configure a 4G U-disk storage to introduce the data! Then you can do various operations for the measured data.
Professional operations and expensive Very practical and low cost
Just know water location and depth Can know water location, water supply direction, water depth and water outflow.

4. Application:
Metal and non-metal ore survey;
Decrease mineral invest venture and increase exploration success rate;
Underground water detect in all kinds of the geological conditions;
Meet demand of drinking water, industrial usage and agricultural irrigation;
Engineering geological prospect and disaster geological detect;
Coal goaf, archaeological mining, city exploration and non-metal pipe survey.
 
5. Main features:
Fast and high efficiency.
Easy to carry.
Easy operation.
Good precision and high accuracy.
Very practical and low cost.
Flexible array-traditional and unique array method.
Hfd-C Water Locator Device for Sale
6. Advantage:  
 
1. It is integrated into an aluminum alloy tool case, then can be carried freely.
2. Built-in charging lithium batteries, can fast charge for 4 hours, then you can use it for 16 hours.
3. Special rough measurement and fine measurement electrodes largely improve the speed and precision of equipment.
4. Multiple anti-jamming design and unique anti-jamming modes to choose largely increase the accuracy and stability of data.

 Hfd-C Water Locator Device for Sale
 Hfd-C Water Locator Device for Sale
 

Living garbage disposal equipment

With the development of increasingly urbanization , the amount of garbage increased geometrically. Incineration method gradually lost the market since the dioxin and toxic produced by incineration causing irreversible effects on the environment, and for landfill, some garbage is difficult to degrade, which even takes hundreds of years, we cannot afford this even though China has a vast territory, because land is a valuable non renewable resources.

After continuous efforts, Shangqiu Jinpeng industrial Co., Ltd developed a special biomass pyrolysis equipment for domestic waste treatment. After treatment by the equipment, can get about 20% of the oil profits from domestic waste, and in the process, through the low temperature anaerobic biomass pyrolysis of domestic waste harmless treatment, to ensure environmental health.

Living Garbage Processing Equipment 

Flow chart for living garbage disposal equipment

Garbage Processing Equipment 

Living garbage disposal equipment has two system:

1. Garbage Sorting System

The equipment is applied to separate organic waste and inorganic waste from large-size refuse and processing them separately.

 

2. Biomass Pyrolysis Equipment

 

2.1 The combustible waste after sorting and shredding such as life rubber, plastics and knitted fabrics is conveyed into the low-temperature and anaerobic biomass decomposing processor. Through catalyzing and heating, oil gas is produced and then condensed into oil mixture by condenser. The remaining that can`t be liquefied is processed through gas purification system and then used to generate electricity by gas generator. The smoke after burning goes into smoke scrubbers so as to remove acid gas and dust, and then is discharged through chimney when it reaches relevant environmental standards. The residue from biomass decomposition is conveyed into carbon black collecting tanks through sealed screw, without any pollution.

 

 

2.2  The technical parameter of Biomass Pyrolysis Equipment

 NO.

            ITEM

Technical Parameter

1

Suitable Raw Materials

   Small pieces of Waste tire, rubber, waste plastic≤5cm

2

Operating Mode

Fully Continuous Operation

3

Structure

Horizontal Type Revolve

4

Loading and discharging

Fully automatic feeding and discharging under high temperature at same time

5

Capacity(24h)

20-40Mt

6

Work Pressure

Slightly Negative Pressure

7

Oil Yield of tyres

40%-45%

8

Reactor Rotational Speed

1R/M

9

Installation Power

110kw/h

10

Cooling Method

Cycle water

11

Type of Drive

Sprocket Wheel

12

Heating Method

Direct

13

Noise dB(A)

≤85

14

Main Reactor Weight (MT)

About 20Mt

15

Total Weight(MT)

About 45Mt

16

Installation Space Required

60m*20m

17

Manpower

2/shift

18

 Shipment

5*40HQ

19

 Delivery time

≤70Days

 

 

 

Living Garbage Processing Equipment

Municipal Waste Recycling,Garbage Recycling Machine,Waste To Energy

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com