Regardless of any mechanical equipment, after long-term use, there will be some large and small faults and problems. The electric forklift is the same when used. After the electric forklift has been used for a long time, it will also inevitably fail. For example, the electric power system of the electric forklift is faulty. It mainly means that the charging voltage is too low. High or not charged. 1. When the engine of an electric forklift is in operation, there is a case where the light bulb is easily burned, or the electrolyte of the battery is excessively consumed. The voltage value at both ends of the battery of the lower electric forklift or the generator of the vehicle is measured by using a voltage measurement circuit that can use the multimeter. If the value exceeds the standard value, it proves that the voltage charged by the electric forklift is too high. It may be because the regulator operating voltage has failed. 2. When the electric forklift's engine is in normal operation, the charging indicator lights up or the ammeter points to a negative direction, then it proves that the electric forklift's generator does not generate electricity and the battery is not charging. The main cause of this failure is the failure of electrical lines, regulators, generators, etc., and the need for maintenance. 3. When the electric forklift's engine is in operation, when the charge indicator flashes and the ammeter is swinging around zero, you can use the multimeter's trip voltage to measure the electric forklift battery or the vehicle to generate electricity. What is the voltage value at both ends of the machine. If the voltage value is lower than the standard value, it proves that the voltage of the electric forklift is too low. This condition is mainly caused by a malfunction of the regulator's operating voltage or a malfunction of the rotor, the stator inside the generator, loose belts, etc.
The industrial veggie slicer is carefully designed based on the advanced technology of various manufacturers and the needs of users. It has the advantages of high work efficiency, convenient use, reliable quality, beautiful appearance and compact structure. Widely suitable for food processing plants, canteens and vegetable processing industries.
The following is an introduction to various types of industrial veggie slicer:
The vegetable dicing machine is suitable for dicing sauerkraut, garlic cloves, onions, ginger, potatoes, mushrooms, and potato roots. It has the characteristics of automatic orientation, neat slice shape, uniform thickness and good surface finish.
The multi-function vegetable cutter uses high-speed rotating blades to cut materials. Suitable for cutting vegetables. The large shredding and slicing machine is suitable for shredding and slicing ginger, small balls, roots and stem vegetables.
The two-dimensional cutting machine is designed for the needs of cutting large leafy vegetables such as spherical cabbage (cabbage) and Chinese cabbage into squares or long squares. Compared with similar products, the main advantage of this machine is that the material will not stay in the gap between the disc knife and the cross-cutting knife, which meets the requirements of food safety.
The double frequency conversion vegetable cutting machine is suitable for cutting and shredding onions, garlic, chives, celery, Chinese cabbage, dried tofu, spinach, banana slices, melons, eggplants, etc. Also replace the kitchen knife, which can cut root vegetables, such as bamboo shoots, carrots, potatoes, sweet potatoes, etc. shredded and sliced.
Slicer Machine,Electric Slicers,Slicing Machines,Food Slicer Machine,Slicer Machine for Meat,Slicer Machine for Restaurant Kassel Machinery (zhejiang) Co., Ltd. , https://www.kassel-group.com
Electric circuit failure of electric forklift