Hydraulic metal machine is mainly applicable to steel mills, recycling and processing industries and non-ferrous metal smelting industries. Hydraulic Baling Machine can squeeze all kinds of metal scrap (steel shaving, waste steel, waste aluminum, waste copper, waste stainless steel and scrap automobile waste, etc.) into cuboid, octagon, cylinder and other shapes of qualified charge, which can reduce the transportation and smelting cost, and improve the speed of furnace. It is mainly used for cold pressing under normal conditions for scrap metal scraps, scrap steel scraps, waste oil tank, disassembling car shell and other metal scraps with a thickness of less than 3mm. Cold pressed into blocks for easy storage and transportation or furnace.
Features:
1) Hydraulic drive, smooth and noiseless work, fast extrusion speed, large extrusion force, compact package block, not easy to be scattered.
2) high quality national standard steel plate with advanced welding technology to make the mechanical parts strong and durable, low failure rate, long service life.
3) the oil cylinder seal is imported glyd ring, good sealing performance, strong pressure resistance.
4) Convenient installation, small floor space, no foundation, foot, etc. Simple operation, detachable and PLC automatic mode.
5) Cold extrusion will not change the metal material and increase the utilization rate.
Metal Shavings Baler, Scrap Metal Baler, Waste Metal Baler, Sheet Metal Baler, Metal Scraps Baler Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecobriquetter.com
Company Information
     Established in 1979, Jiangyin Gearbox Manufacturing Co., Ltd.  is located in National High-tech Development Zone of Jiangyin, Jiangsu, China.  With more than 38 years' experience in research and development of gear transmission products, the factory covers an area of 87,000 square meters.  ISO9001  certified in 1999, we have high qualified R&D engineer team and manufacturing talents as well as first-class processing and testing equipments.
Â
Product Description
     YPS Series gearbox is a drive designed to match with inverted parallel twin screw extruders. The main parts are manufactured by way of carburizing quenching hardening, and gear grinding. Its precision is up to Grade 6 (ISO1328-1:1995). Thrust bearing with over-specification is mounted on the front end of hollow output shaft to accommodate screw back pressure forces. The whole unit is small volume, high carry capacity, stable drive, low noise and high efficiency.
Features
1. The case made of spheroidal graphite casting is rigid, flat and beautiful after going through multi-dimensional machining.
2. The driving devices of the reduction gearbox and the distributor box are respectively manufactured with ordinary steel and ultra-strength alloyed case-hardened steel as well as the carburizing, quenching and gear grinding technology. The key parts are added with the surface peening process. Hardness of Tooth Surface: HRC54~62, Hardness of Core: HRC30~40, Gear Precision: Grade 6. High efficiency, high strength and low noise
3. The designed life of the bearing is between 20, 000 to 50, 000 hours.
4. The external forced lubrication and cooling system strengthen the lubricating and cooling effect, featuring reliable operation and convenient maintenance.
Technical Parameter:
Specification
Item
76/90
87/100
90/107
95/116
104/120
110/130
Output Speed ()
35 -Â 45
Single Shaft Output Torque
()5252
5709
8895
9700
11660
15000
Â
FAQ
 Are you trading company or manufacturer ?
A: We are manufacturer.
Q: How long is your delivery time?
A: Generally it is within 10 days if the goods are in stock, for goods produced as per order, it is within 35 days after confirmation of order.
Q:How long should IÂ wait for the feedback after IÂ send the enquiry?
A: Normally Within 12 hours.
Q:What information should IÂ give you to confirm the product?
A: Model/Size, Transmission Ratio, Speed, Shaft directions &Â Order quantity etc.
Q: Hong long is your product warranty?
A:We offer 12 months warranty from departure date of the goods.
Q: What is your payment terms?
 T/T 100% in advance for amount less than USD10000.-, 30% T/T in advance ,balance before shipment for amount above USD10000.-
  If you have any other questions, please feel free to contact us below:
Â
 HOW TO CONTACT US?
Send your Inquiry Details in the Below, click "Send" Now!
Also you can contact us through following ways:
Tel:+86 15358026079
Website: www.jiangchi.com
Â
Â
Â
Duoling Brand YPS 76/90 Gear Box for Parallel Twin Screw Extruder
Company Information
     Established in 1979, Jiangyin Gearbox Manufacturing Co., Ltd.  is located in National High-tech Development Zone of Jiangyin, Jiangsu, China.  With more than 38 years' experience in research and development of gear transmission products, the factory covers an area of 87,000 square meters.  ISO9001  certified in 1999, we have high qualified R&D engineer team and manufacturing talents as well as first-class processing and testing equipments.
Â
Product Description
     YPS Series gearbox is a drive designed to match with inverted parallel twin screw extruders. The main parts are manufactured by way of carburizing quenching hardening, and gear grinding. Its precision is up to Grade 6 (ISO1328-1:1995). Thrust bearing with over-specification is mounted on the front end of hollow output shaft to accommodate screw back pressure forces. The whole unit is small volume, high carry capacity, stable drive, low noise and high efficiency.
Features
1. The case made of spheroidal graphite casting is rigid, flat and beautiful after going through multi-dimensional machining.
2. The driving devices of the reduction gearbox and the distributor box are respectively manufactured with ordinary steel and ultra-strength alloyed case-hardened steel as well as the carburizing, quenching and gear grinding technology. The key parts are added with the surface peening process. Hardness of Tooth Surface: HRC54~62, Hardness of Core: HRC30~40, Gear Precision: Grade 6. High efficiency, high strength and low noise
3. The designed life of the bearing is between 20, 000 to 50, 000 hours.
4. The external forced lubrication and cooling system strengthen the lubricating and cooling effect, featuring reliable operation and convenient maintenance.
Technical Parameter:
Specification
Item
76/90
87/100
90/107
95/116
104/120
110/130
Output Speed ()
35 -Â 45
Single Shaft Output Torque
()5252
5709
8895
9700
11660
15000
Â
FAQ
 Are you trading company or manufacturer ?
A: We are manufacturer.
Q: How long is your delivery time?
A: Generally it is within 10 days if the goods are in stock, for goods produced as per order, it is within 35 days after confirmation of order.
Q:How long should IÂ wait for the feedback after IÂ send the enquiry?
A: Normally Within 12 hours.
Q:What information should IÂ give you to confirm the product?
A: Model/Size, Transmission Ratio, Speed, Shaft directions &Â Order quantity etc.
Q: Hong long is your product warranty?
A:We offer 12 months warranty from departure date of the goods.
Q: What is your payment terms?
 T/T 100% in advance for amount less than USD10000.-, 30% T/T in advance ,balance before shipment for amount above USD10000.-
  If you have any other questions, please feel free to contact us below:
Â
 HOW TO CONTACT US?
Send your Inquiry Details in the Below, click "Send" Now!
Also you can contact us through following ways:
Tel:+86 15358026079
Website: www.jiangchi.com
Â
Â
Â
Duoling Brand Yps 76/90 Gear Box for Parallel Twin Screw Extruder
Model NO.: YPS76/90 Gear Box for Parallel Twin Screw Extruder
Type: Bevel Gear
Manufacturing Method: Rolling Gear
OEM/ODM Serivce: Available
Material: High Strength Alloy Steel
Certificate: ISO9001-2008, SGS
Warranty: 12 Months
Trademark: Duoling
Transport Package: Plywood Case
Specification: 76/90
Origin: China
HS Code: 848340900
Model NO.: YPS76/90 Gear Box for Parallel Twin Screw Extruder
Type: Bevel Gear
Manufacturing Method: Rolling Gear
OEM/ODM Serivce: Available
Material: High Strength Alloy Steel
Certificate: ISO9001-2008, SGS
Warranty: 12 Months
Trademark: Duoling
Transport Package: Plywood Case
Specification: 76/90
Origin: China
HS Code: 848340900
Duoling Brand YPS 76/90 Gear Box for Parallel Twin Screw Extruder