Cut-to-Length and Slitting Lines

Model NO.: Cut-To-Length And Slitting Lines
Thickness Range: 0.1-4mm
Raw Material: Cr Steel, Al, PPGI, Hr, Silicon Steel
Cutting Length Precision: Plus Minus 0.3-0.5
Package: Naked Package and Fixed in The Container
Trademark: Wuxi Longar
Transport Package: Naked Package and Fixed in The Container
Specification: Steel Coil Cut To Length Line Suppliers
Origin: Wuxi
Product Feature
Cut-to-Length and Slitting Lines

Main Techical Parameters
Cut-to-Length and Slitting Lines

Machine Layout
Cut-to-Length and Slitting Lines

Coil Car&V Plate -- Decoiler -- Press&Guider -- Hydraulic Shovel -- Pinch&Leveler -- Loop -- Side Guider -- Servo Cut Length -- Shear -- Working Table -- X Lifter -- Stacker -- Product Car
About Our Company

WUXI LONGAR MACHINERY MANUFACTORY Co., Ltd is a professional manufacturer and exporter for all kinds of Slitting lines and Cut to Length lines.In the past more than 15 years We have established and keep good business relationship with global customers on basic mutual benefits, contributing to our great business records and reputation.Our products are exported to American& European &South American& Africa &Asian market etc…
The thickness for Slitting line is 0.2-16mm, width range from 200-3000mm, with speed up to 180m/min.

The thickness for Cut to Length line is 0.09-28mm, width range from 200-3000mm, with speed up to 80m/min.

We have achieved CE certificate and SGS certificate .
Our goal is to supply highly quality personalized products by on time delivery with all around service at reasonable cost.Working to extend our presence internationally, we are looking forward to cooperating with your company for mutual benefit.
Contact Jean Sun for inquiry
Cut-to-Length and Slitting Lines

Wuxi Longar Machinery Manufactory Co.,Ltd

Wuxi Bono International Co.,Ltd

Factory:No.19 Jingxin Road, Xibei Industry Zone, Wuxi, Jiangsu, China

Office:No.1005, 39#, Liandong U Builing, Beitang District, Wuxi, Jiangsu, China

Http://www.Wxlongar.Com

Http://www.Wxbono.Com

Tel:+86 510 82698581

Fax:+86 510 82610322

Mobile:+86 15298417602

Saddle Fusion

What is saddle fusion? Saddle fusion (sidewall fuson) is, like butt fusion and socket fusion, another process based on hot plate welding. Saddle heat fusion differs from either socket, or butt fusion methods by performing fusion into the side of the pipe wall in a transverse orientation to the main pipe, rather than in line with the pipe. Hdpe saddle welding required workshop saddle fusion machines. This hdpe fusing process can be conducted while pressurized creating a [hot tap" when allowed by regulations and the pipeline owner. The pipe and saddle fitting surfaces are heated/fusing until they reach a proper temperature, the heating tool is removed and then the weld is formed. The process is complete following a cooling process. Always have a trained joining operator perform this procedure using properly maintained Pipe Fabrication Workshop Machines. For polyethylene reducing tee fabrication, you can view Wuxi Yuda MRH series HDPE/Poly/Polyethylene plastic pipe saddle welding machines on "www(dot)cnbuttfusion(dot)com"

Saddle Fusion,Electrofusion Saddle,Saddle Welding Machine,Saddle Fusion Machines

WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.pipefusionwelding.com