Automatic Wire Stripping Machine/Wire Stripping/Cable Stripper

Model NO.: 685
Shape: Square
Size: Middle-Sized
Power: AC200/110/50Hz
Trademark: joinstars
Transport Package: Carton Box
Specification: 50*60*50cm
Origin: China
Model NO.: 685
Shape: Square
Size: Middle-Sized
Power: AC200/110/50Hz
Trademark: joinstars
Transport Package: Carton Box
Specification: 50*60*50cm
Origin: China
Automatic Wire Stripping Machine/Wire Stripping/Cable Stripper

Automatic Wire Stripping Machine/Wire Stripping/Cable Stripper
Automatic Wire Stripping Machine/Wire Stripping/Cable Stripper
Automatic Wire Stripping Machine/Wire Stripping/Cable Stripper
Automatic Wire Stripping Machine/Wire Stripping/Cable Stripper
Automatic Wire Stripping Machine/Wire Stripping/Cable Stripper
Specification
Weight: 30-31KG
Overall Dimensions: 390mm×350mm×235mm
Power: 160-300W   
Mode of Display: LCD Liquid Crystal Display Screen     
Cutting Length: 1mm - 9999mm   
Cutting Tolerance: ≤0.002×L (L = Cutting Length)      
Stripping Length: Head 0 - 35mm ,Tail 0- 15mm  
Cutting Cross-sectional Area of Wire Core:
(508C 0.2-2.5 mm2    508-SD 0.1- 4.5mm2   )
(508E 0.1-8 mm2     508-JE 0.1- 10mm2   )
Maximum Diameter of Conduit Pipe: ¢11
Middle-stripping: 10 places of stripping 

Material of Knife: High-quality Tungsten Steel 

Stripping Speed: 3000 - 80000 p c s /h 
Mode of Driving: Mode C Two-wheeled Drive
Mode SD/SDB/E/JE Four-wheeled Drive
Adjusting Speed: 0 Slowest, 9 Fastest    
  1. Operating Principle
The wire is conveyed through the wire-inlet rollers and the wire-outlet rollers and the wire cutting and stripping is finished through the knife rack assembly, which are all controlled by microcomputer technology.
  1. Introduction to Main Function of Every Part
1. Wire-inlet Rollers: for conveying wires and stripping wire heads.
2. Wire-outlet Rollers: for conveying wires and stripping wire tails.
3. Knife Rack Assembly: for wire cutting, head stripping and tail stripping.
4. Wire-inlet Gap Adjusting Rollers: for adjusting the wire-inlet gap, turn it down to decrease the gap and turn it up to increase the gap. 
5. Wire-outlet Gap Adjusting Rollers: for adjusting the wire-outlet gap, turn it up to increase the gap and turn it down to decrease the gap. 
6. Conduit Pipe Assembly: for ensuring the wire smooth and straight and preventing the wire from moving defectively when the wire moves from the wire-inlet rollers to the knife rack assembly. 
  1. Key Points for Operation of Mechanical Parts
1. The wire is put into the wire inlet, through the wire-inlet rollers and the conduit pipe, and then onto the knife edge.   
2. Wire-inlet Gap Adjusting: adjust the gap between the two rollers through the wire-inlet gap adjusting rollers to make the gap less than the outer diameter of the wire to be stripped so as to ensure normal stripping of wire covering.  
3. Wire-outlet Gap Adjusting: adjust the gap between the two rollers through the wire-outlet gap adjusting rollers to make the gap less than the outer diameter of the wire to be stripped, and adjust the indicator light of wire breakage at the critical state between on and out, then turn up for half circle. If the machine still stops because the wire knobs, adjust the gap a little smaller. 







  Automatic Wire Stripping Machine/Wire Stripping/Cable Stripper

Automatic Wire Stripping Machine/Wire Stripping/Cable Stripper
Automatic Wire Stripping Machine/Wire Stripping/Cable Stripper
Automatic Wire Stripping Machine/Wire Stripping/Cable Stripper
Automatic Wire Stripping Machine/Wire Stripping/Cable Stripper
Automatic Wire Stripping Machine/Wire Stripping/Cable Stripper
Specification
Weight: 30-31KG
Overall Dimensions: 390mm×350mm×235mm
Power: 160-300W   
Mode of Display: LCD Liquid Crystal Display Screen     
Cutting Length: 1mm - 9999mm   
Cutting Tolerance: ≤0.002×L (L = Cutting Length)      
Stripping Length: Head 0 - 35mm ,Tail 0- 15mm  
Cutting Cross-sectional Area of Wire Core:
(508C 0.2-2.5 mm2    508-SD 0.1- 4.5mm2   )
(508E 0.1-8 mm2     508-JE 0.1- 10mm2   )
Maximum Diameter of Conduit Pipe: ¢11
Middle-stripping: 10 places of stripping 

Material of Knife: High-quality Tungsten Steel 

Stripping Speed: 3000 - 80000 p c s /h 
Mode of Driving: Mode C Two-wheeled Drive
Mode SD/SDB/E/JE Four-wheeled Drive
Adjusting Speed: 0 Slowest, 9 Fastest    
  1. Operating Principle
The wire is conveyed through the wire-inlet rollers and the wire-outlet rollers and the wire cutting and stripping is finished through the knife rack assembly, which are all controlled by microcomputer technology.
  1. Introduction to Main Function of Every Part
1. Wire-inlet Rollers: for conveying wires and stripping wire heads.
2. Wire-outlet Rollers: for conveying wires and stripping wire tails.
3. Knife Rack Assembly: for wire cutting, head stripping and tail stripping.
4. Wire-inlet Gap Adjusting Rollers: for adjusting the wire-inlet gap, turn it down to decrease the gap and turn it up to increase the gap. 
5. Wire-outlet Gap Adjusting Rollers: for adjusting the wire-outlet gap, turn it up to increase the gap and turn it down to decrease the gap. 
6. Conduit Pipe Assembly: for ensuring the wire smooth and straight and preventing the wire from moving defectively when the wire moves from the wire-inlet rollers to the knife rack assembly. 
  1. Key Points for Operation of Mechanical Parts
1. The wire is put into the wire inlet, through the wire-inlet rollers and the conduit pipe, and then onto the knife edge.   
2. Wire-inlet Gap Adjusting: adjust the gap between the two rollers through the wire-inlet gap adjusting rollers to make the gap less than the outer diameter of the wire to be stripped so as to ensure normal stripping of wire covering.  
3. Wire-outlet Gap Adjusting: adjust the gap between the two rollers through the wire-outlet gap adjusting rollers to make the gap less than the outer diameter of the wire to be stripped, and adjust the indicator light of wire breakage at the critical state between on and out, then turn up for half circle. If the machine still stops because the wire knobs, adjust the gap a little smaller. 







 

Wind Power

Our firm introduced whole set of good-sized numerical control hydraulic folding equipment(1280/16000) as well as equipped with a series of good-sized professional equipments of armor plate-flatted machine, lengthways cut machine, numerical control cut machine, auto-closed up machine, auto-arc-weld machine, hydraulic redressing straight machine, etc. The firm produces all sorts of conical, pyramidal, cylindrical steel poles with production range of dia 50mm-2250mm, thickness 1mm-25mm, once taking shape 16000mm long, and large-scale steel components. The firm also is equipped with a multicolor-spayed pipelining. At the meantime, for better service to the clients, our firm founded a branch com. The Yixing Jinlei Lighting Installation Com, which offers clients a succession of service from design to manufacture and fixing.

Our products put into market range in: transmission line steel poles, substation tubular poles, high mast poles, flag poles, traffic signal poles, large advertising boards, street lamp poles, telecommunication poles, wind power poles, courtyard lamps,. The products has been sold to Southeast Asia, Australia, Middle East and Europe etc. as well as domestic most provinces and area, has been proved by the English Moody Co., comply with ISO9001:2000 Quality Control Certifications System standards. We have got the certificate for 220KV Transmission line steel poles, 500KV Steel construction and tubular poles, 750KV and below voltage Steel Tubular Tower and Telecommunication Poles.

Wind Power Pole, Wind Power Steel Pole, Solar Lighting Pole, Power Lighting Pole

Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.jinleisteelpole.com