Zinc Shot is a very common Metal Abrasive used on Aluminium die casting parts and Zinc die casting parts. Zinc shot has a similar density but lower hardness. It could clean the surface of some soft casting parts without any damage while steel shot can not. Compared with aluminium, it is heavier and safer when shot blasting. Benefit from these advantages, Zinc shot is widely used in metal casting industry for surface treatment.
Longlived Zinc Shot is made from high qiality zinc wire by drawing, cutting and rounding. There are five shapes of Longlived Zinc Shot and they are as cut, G1, G2, G3 and even G4. The size is from 0.25mm-3.0mm. Of course, customize is available according to your requirement.
Longlived metal abrasive make your shot blasting cheaper, faster and cleaner.
Zinc Cut Wire Shot,Zinc Cut Wire Shot Peening,Zinc Cut Wire Shot Blasting Media,Zinc Cut Wire Shot Peening Media Longlived Metal Products Co ., Ltd , https://www.longlivedmetalproducts.com
Features 1, LCD screen Chinese display, prompt interface operation, keyboard input 2, automatic automatic test test process, automatic identification results 3, automatic saturation vapor pressure gauge using steam pressure bomb level automatic vibration, without manual intervention, guaranteed Vapor pressure bombs and specimens were constant during the test.
4. Auto-saturated vapor pressure measuring instrument The pressure detecting circuit with the single-chip microcomputer as the core can automatically detect the saturated vapor pressure of the sample, and the whole process is automatically completed. The digital display shows the vapor pressure.
Technical parameters 1, temperature control mode: microcomputer automatic temperature control 2, temperature control accuracy: 37.8 ± 0.1 °C
3. Detection method: automatic oscillation, automatic detection 4. Work unit: 3 oxygen bombs 5. Connection method: screw connection 6. Power consumption: 1.5KW
Automatic gasoline saturated vapor pressure measuring instrument
Application scope The automatic steam pressure tester is designed and manufactured according to the requirements specified in the national standard GB/T8017ASTMD323ISO3007NFM07007. It is suitable for testing the vapor pressure of gasoline, volatile oil and other volatile petroleum products; it is not suitable for testing the vapor pressure of liquefied petroleum gas. The instrument uses a cooled sample to fill a gasoline chamber of a vapor pressure meter and connects the gasoline chamber to a certain temperature of air.